In the compressor system, the pre-filter and post-filter play a key role. They have different functions and filtration accuracy, and together they make the air output by the compressor clean, dry. So what is the difference between the pre-filter and the post-filter of the compressor?
Key Takeaways
- The pre-filter and post-filter cooperate with each other.
- Technology configuration
- Import and ship assistance
- Pre-filter
The pre-filter is located between the receiver tank and the refrigeration dryer. Its main task is to perform preliminary filtration before the air enters the cold dryer. The pre-filter can eliminate moisture, oil and larger impurities from the air. This helps safeguard the dryer from damage or poor output performance due to excess impurities.
The filtration accuracy of the pre-filter is usually lower, such as 1-5 microns. This means it can capture particles larger than 1-5 microns in diameter. Although the pre-filter has a lower filtration rating, it is still very important in the entire compressor system because it can safeguard subsequent equipment and lower its burden.
Post filter
The post filter is located after the refrigeration dryer. The function of a cold dryer is to lower the moisture in the air to a very low level, making the air drier. Nevertheless, even after being processed by a cold dryer, there may still be some fine impurities in the air. At this time, the post-filter comes into play to further eliminate these fine impurities, making the output air clean, dry, and oil-free.
The filtration rating of the post-filter is usually 0.01-1 micron. This means it can capture particles larger than 0.01-1 micron in diameter. The post-filter plays a decisive role in the entire compressor system because it allows the output air to meet the required quality standards and meet the requirements of various industrial use cases.
- The pre-filter and post-filter cooperate with each other.
Pre-filters and post-filters work together in the compressor system to enhance the quality of the output air. The pre-filter is responsible for preliminary filtration and protection of the cold dryer; the post-filter is responsible for further improving air quality to meet the needs of different use case scenarios. When choosing a compressor system, we need to choose the appropriate pre-filter and post-filter based on actual needs and use case scenarios. For example, in situations with higher air quality requirements, such as the food, pharmaceutical and electronic sectors, we should choose post-filters with higher filtration rating to enhance the air quality in the production process.
For continued output performance and air quality of your compressor system, it is recommended regular filter inspection and replacement. This not only extends the working life of the equipment, but also outputs premium compressed air. Our professional team will provide you with detailed upkeep advice and services to keep your compressor system in optimal condition.
- Technology configuration
- Strike Cost
- Import and ship assistance
Frequently Asked Questions
What is the difference between a pre-filter and an after-filter?
A pre-filter sits before the dryer and removes bulk moisture and coarse particles; an after-filter sits after the dryer and polishes remaining fine impurities.
How do I choose a refrigerated versus an adsorption dryer?
Refrigerated dryers are economical down to about +3°C dew point. Desiccant dryers are needed for lower dew points or critical, oil-free applications.
What root causes high dew point in a refrigerated air dryer?
Overloading, high inlet temperature, a faulty condenser, or a blocked drain can all raise the dew point.
Get a Quote for Your Application
Tell us your required pressure, air flow, and application, and the Panrui team will recommend the right compressor with a detailed quotation. Contact us or browse the product range to learn more.